chaintng asked:
My dedicated server has a problem after i reboot itself.
The cpu load average is very high as following detail after i run top command
top - 23:40:41 up 50 min, 3 users, load average: 236.24, 146.96, 124.29
Tasks: 556 total, 1 running, 555 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.2%us, 0.2%sy, 0.0%ni, 0.0%id, 98.6%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 16230212k total, 2994040k used, 13236172k free, 26404k buffers
Swap: 2097144k total, 0k used, 2097144k free,
i tried to stop httpd, it show ‘OK’ but after i run “service httpd status” it still show it’s running.
there are many process related to httpd after i run “ps -ef | grep httpd”
apache 7984 7209 0 23:42 ? 00:00:00 /usr/sbin/httpd -k start -DSSL
apache 7985 7209 0 23:42 ? 00:00:00 /usr/sbin/httpd -k s
I have no idea what it is but it keep duplicate itself every second (the pid run very fast)
after i dig into the unix log (var/log/message)
it show some log which may related to harddisk, i’m not quite sure, is it?
Nov 10 00:16:13 host kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Nov 10 00:16:13 host kernel: ata1.00: irq_stat 0x40000008
Nov 10 00:16:13 host kernel: ata1.00: failed command: READ FPDMA QUEUED
Nov 10 00:16:13 host kernel: ata1.00: cmd 60/08:00:f0:e1:4a/00:00:6b:00:00/40 tag 0 ncq 4096 in
Nov 10 00:16:13 host kernel: res 41/40:08:f0:e1:4a/00:00:6b:00:00/00 Emask 0x409 (media error) <F>
Nov 10 00:16:13 host kernel: ata1.00: status: { DRDY ERR }
Nov 10 00:16:13 host kernel: ata1.00: error: { UNC }
Nov 10 00:16:13 host kernel: ata1.00: configured for UDMA/133
Nov 10 00:16:13 host kernel: ata1: EH complete
Please advice me how should i do next to have my server become normal again.
Best Regards,
My answer:
Your hard drive has failed. Replace the defective hard drive.
View the full question and any other answers on Server Fault.
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.